Sheenly App: (iOS/Android)

 

  

Online Catalog

Online Service Yvonne

Follow Us          



Sheenly Lighting Catalog Download


 

 

  

 

Home Support T8 versus T5 Tube: A Brief Analysis

T8 versus T5 Tube: A Brief Analysis

T8 versus T5 Fluorescent: A Brief Analysis

 

1. What do the alpha numeric codes T5 and T8 actually mean?

Much has been made of the differences between T5 technology and T8 technology. I think it is wise to begin by discussing what T5 and T8 actually indicate. The letter ‘T’ in the lighting industry stands for “tubular.” This makes sense when one considers that fluorescent tubes are in fact tubular. The number directly following the letter “T” indicates the thickness or diameter of that particular tube in eighths of an inch.

  • T12 = twelve eighths of an inch in diameter or one and one-half inches thick
  • T8 = eight eighths of an inch in diameter or one inch thick
  • T5 = five eighths of an inch in diameter or five eighths of an inch thick

2. What have these alpha numeric codes come to mean?

As interest in energy saving technologies has grown and become popularized, these codes have come to designate levels of energy efficiency, instead of merely indicating lamp tube diameter.

Assumptions of Efficiency:

  • T12 = old and inefficient
  • T8 = higher efficiency
  • T5 = highest efficiency

Although, these assumptions are generally true, it is important to look at the application and determine the cost benefit of T5 over T8 in order to determine if the increased efficiency of T5 justifies the substantial increase in initial and long term maintenance costs.

3. General Assumptions of Cost

Consider that a standard 4 foot T12 lamp costs between $1.25 and $2.00, a standard T8 lamp between $1.75 and $2.50 and a standard T5 lamp costs between $5.50 and $10.50. T5 costs significantly more than T8 and does not outperform it by the same margin. In fact, in many applications, the performance differences are negligible. Furthermore, all lamps are equally weighted with an average life of 20 000 hours.

General Assumptions of Cost:

  • T12 = lowest lamp, ballast and fixture cost
  • T8 = approx. 20% more expensive than T12
  • T5 = 3-4 times the cost of T8

4. Why is T5 the best and how does that apply?

There are several different factors that determine levels of efficiency. Quality of light measured in CRI (Colour Rendering Index), quantity of light measured in LPW (Lumens per Watt) and CU (Co-efficiency of utilization.) The numbers being used for CU are general for those used in the low level (12 feet and under) multi-residential environment so there can be fluctuations.

CRI levels: LPW levels: CU (Generally):
T12 = 62CRI T12 = 78LPW T12 = .46CU
T8 = 85CRI T8 = 92LPW T8 = .76CU
T5 = 85CRI T5 = 103LPW T5 = .90CU

Considering these general factors, it is obvious that T5 is the best. But, how much better? With all factors weighed equally, a general presumption can be made, that:

  • a. T8 is 40% more efficient than T12.
  • b. T5 is 51% more efficient than T12.

Yet, T5 in this environment is only 9% more efficient than T8. This would never justify the substantial increase in fixture, lamp and ballast costs.

Furthermore, if energy savings is an issue, you can often lower the light output by 9 or 10 percent in order to recover the efficiency without any real impact to the perceived light levels.

5. Weather Conditions and Long Term Performance

The standard 32 watt T8 and an electronic ballast with a low temperature rating, are proven performers in a wide array of extreme applications. The systems are tried, tested and true in parking garages, factories, extreme cold environments and the list goes on. T5’s don’t have the track record in extreme applications.

We believe the manufacturers are still “working out the bugs” as the largest portion of our warranty work involves defective T5 lamps and ballasts.

Furthermore, T8 lamps and ballasts are now commodity items and can be purchased at low costs. T5 is still a premium product, whose research and development costs haven’t even been fully realized, let alone the process to produce commoditized to create low cost, highly reliable, replacement parts.

6. Conclusion

The “bottom line” is that T5 is superior to T8 in that it creates more usable light. However, it is not a “game changing” technology in that its superiority renders T8 obsolete (as is the case with T12). Ontario incentive program through the Ontario Power Authority pays the same incentives on T5’s as they do on T8’s.

Finally, the real game changer is LED and organic LED technologies. These technologies will render both T5 and T8 fluorescent obsolete in the future. And now, Sheenly Lighting comes with high efficient LED T8 tubes, which brings you more energy and money saving!!

Read more about Sheenly LED T8 Tubesand Cost Comparison Analysis.